dmesg - phoronix gputest
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.1-031401-lowlatency (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201404141220 SMP PREEMPT Mon Apr 14 16:29:57 UTC 2014
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff] usable
BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000da4b4fff] usable
BIOS-e820: [mem 0x00000000da4b5000-0x00000000da4f7fff] ACPI NVS
BIOS-e820: [mem 0x00000000da4f8000-0x00000000da762fff] usable
BIOS-e820: [mem 0x00000000da763000-0x00000000da966fff] reserved
BIOS-e820: [mem 0x00000000da967000-0x00000000dacdbfff] usable
BIOS-e820: [mem 0x00000000dacdc000-0x00000000dad67fff] reserved
BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS
BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data
BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Semp Toshiba IS 1442 /IS 1442 , BIOS S0.08 07/28/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FE0000000 write-back
2 base 0DB800000 mask FFF800000 uncachable
3 base 0DC000000 mask FFC000000 uncachable
4 base 0E0000000 mask FE0000000 uncachable
5 base 11FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 512MB, type WB
reg 2, base: 3512MB, range: 8MB, type UC
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 3584MB, range: 512MB, type UC
reg 5, base: 4606MB, range: 2MB, type UC
total RAM covered: 4022M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3512MB, range: 8MB, type UC
reg 4, base: 3520MB, range: 64MB, type UC
reg 5, base: 4GB, range: 512MB, type WB
reg 6, base: 4606MB, range: 2MB, type UC
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdacdc max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce90-0x000fce9f] mapped at [ffff8800000fce90]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
[mem 0x11fc00000-0x11fdfffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
[mem 0x11c000000-0x11fbfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
[mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xda4b4fff]
[mem 0x40200000-0xda3fffff] page 2M
[mem 0xda400000-0xda4b4fff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0xda4f8000-0xda762fff]
[mem 0xda4f8000-0xda762fff] page 4k
init_memory_mapping: [mem 0xda967000-0xdacdbfff]
[mem 0xda967000-0xda9fffff] page 4k
[mem 0xdaa00000-0xdabfffff] page 2M
[mem 0xdac00000-0xdacdbfff] page 4k
RAMDISK: [mem 0x34cf6000-0x36672fff]
ACPI: RSDP 00000000000f0430 000024 (v02 stinfo)
ACPI: XSDT 00000000daff4070 00005C (v01 stinfo sempinfo 01072009 AMI 00010013)
ACPI: FACP 00000000daffd298 0000F4 (v04 stinfo sempinfo 01072009 AMI 00010013)
ACPI: DSDT 00000000daff4158 00913B (v02 stinfo sempinfo 00000001 INTL 20051117)
ACPI: FACS 00000000dafdef80 000040
ACPI: APIC 00000000daffd390 000072 (v03 stinfo sempinfo 01072009 AMI 00010013)
ACPI: MCFG 00000000daffd408 00003C (v01 stinfo sempinfo 01072009 MSFT 00000097)
ACPI: SLIC 00000000daffd448 000176 (v01 stinfo sempinfo 01072009 AMI 00010013)
ACPI: HPET 00000000daffd5c0 000038 (v01 stinfo sempinfo 01072009 AMI. 00000004)
ACPI: SSDT 00000000daffd5f8 0007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000daffddc0 000996 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
Initmem setup node 0 [mem 0x00000000-0x11fdfffff]
NODE_DATA [mem 0x11fdf6000-0x11fdfafff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xda4b4fff]
node 0: [mem 0xda4f8000-0xda762fff]
node 0: [mem 0xda967000-0xdacdbfff]
node 0: [mem 0x100000000-0x11fdfffff]
On node 0 totalpages: 1025070
DMA zone: 64 pages used for memmap
DMA zone: 153 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 13915 pages used for memmap
DMA32 zone: 890517 pages, LIFO batch:31
Normal zone: 2040 pages used for memmap
Normal zone: 130560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xda4b5000-0xda4f7fff]
PM: Registered nosave memory: [mem 0xda763000-0xda966fff]
PM: Registered nosave memory: [mem 0xdacdc000-0xdad67fff]
PM: Registered nosave memory: [mem 0xdad68000-0xdafe7fff]
PM: Registered nosave memory: [mem 0xdafe8000-0xdaffffff]
PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86976 r8192 d23616 u524288
pcpu-alloc: s86976 r8192 d23616 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1008898
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3925000K/4100280K available (7658K kernel code, 1099K rwdata, 3592K rodata, 1344K init, 1432K bss, 175280K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.531 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.06 BogoMIPS (lpj=2394531)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 24K (ffffffff81e64000 - ffffffff81e6a000)
ftrace: allocating 31515 entries in 124 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19156.24 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xda4b5000-0xda4f7fff] (274432 bytes)
PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:34:33, date: 04/16/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dad50718 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000dad51a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dad4fd98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7d0a000-0xf7d0a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7d08000-0xf7d083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7d06000-0xf7d067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009a800-0x0009ffff]
e820: reserve RAM buffer [mem 0xda4b5000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda763000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdacdc000-0xdbffffff]
e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [mem 0xfe800000-0xfe80ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0a: Plug and Play ACPI device, IDs STLc063 SYN0300 SYN0302 SYN0002 PNP0f13 PNP0f03 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26100K (ffff880034cf6000 - ffff880036673000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd64b5000-0xda4b5000] (64MB) mapped at [ffff8800d64b5000-ffff8800da4b4fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1397676873.579:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7717
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (62 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (43 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d08000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.1-031401-lowlatency ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d07000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.14.1-031401-lowlatency ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: ef3626f2f008628fe87c84802d1eb672970f5b34'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:235:597
rtc_cmos 00:05: setting system clock to 2014-04-16 19:34:33 UTC (1397676873)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1344K (ffffffff81d14000 - ffffffff81e64000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 524K (ffff88000177d000 - ffff880001800000)
Freeing unused kernel memory: 504K (ffff880001b82000 - ffff880001c00000)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
systemd-udevd[123]: starting version 204
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 40 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90000644000, 00:26:2d:cf:14:54, XID 0c200000 IRQ 40
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06300 irq 41
ata6: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: Slimtype DVD A DS8A5S, WC22, max UDMA/100
ata5.00: configured for UDMA/100
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1.00: ATA-8: TOSHIBA MK5059GSXP, GN001U, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5059GS GN00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM Slimtype DVD A DS8A5S WC22 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 2-1: new high-speed USB device number 2 using ehci-pci
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.3: new low-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=0007
usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Optical Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1BCF:0007.0001/input/input5
hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.3/input0
tsc: Refined TSC clocksource calibration: 2394.560 MHz
usb 1-1.5: new high-speed USB device number 4 using ehci-pci
random: nonblocking pool is initialized
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:44: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b287
usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.5: Product: USB 2.0 Camera
usb 1-1.5: Manufacturer: Realtek
usb 1-1.5: SerialNumber: 0x0001
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
init: ureadahead main process (285) terminated with status 5
Adding 2999292k swap on /dev/sda5. Priority:-1 extents:1 across:2999292k FS
systemd-udevd[390]: starting version 204
lp: driver loaded but no devices found
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
bcma: bus0: Bus registered
systemd-udevd[468]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3 1 3': No such file or directory
mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x12
device-mapper: multipath: version 1.6.0 loaded
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x12
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x12
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
systemd-udevd[491]: failed to execute '/lib/udev/mtp-probe' 'mtp-probe /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5 1 4': No such file or directory
Linux video capture interface: v2.00
AVX version of gcm_enc/dec engaged.
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b287)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
SKU: Nid=0x1d sku_cfg=0x40179a2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000007
SKU: customization=0x0000009a
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x18
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d
realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0269
cfg80211: Calling CRDA to update world regulatory domain
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Brightness must be controlled by acpi video driver
input: Acer BMA150 accelerometer as /devices/virtual/input/input12
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
psmouse serio1: sentelic: Finger Sensing Pad, hw: 14.2.1, sn: 53322, sw: 1.1.0-K
input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input7
Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
b43: probe of bcma0:0 failed with error -524
Broadcom 43xx driver loaded [ Features: PNL ]
brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
init: failsafe main process (868) killed by TERM signal
Bluetooth: Core ver 2.18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: avahi-cups-reload main process (1003) terminated with status 1
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 00:1d:d6:63:57:70
wlan0: send auth to 00:1d:d6:63:57:70 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:1d:d6:63:57:70 (try 1/3)
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x174 offMax=0x57f3
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10 (interface 0x001a0007).
wlan0: RX AssocResp from 00:1d:d6:63:57:70 (capab=0xc11 status=0 aid=1)
brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
vboxpci: IOMMU not found (not registered)
brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=186.223.131.23 DST=192.168.0.3 LEN=1500 TOS=0x00 PREC=0x00 TTL=61 ID=19579 DF PROTO=TCP SPT=443 DPT=44945 WINDOW=536 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=1470 TOS=0x00 PREC=0x00 TTL=53 ID=54993 PROTO=TCP SPT=80 DPT=42959 WINDOW=670 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=186.223.131.23 DST=192.168.0.3 LEN=1500 TOS=0x00 PREC=0x00 TTL=61 ID=19580 DF PROTO=TCP SPT=443 DPT=44945 WINDOW=536 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=1470 TOS=0x00 PREC=0x00 TTL=53 ID=54993 PROTO=TCP SPT=80 DPT=42959 WINDOW=670 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=186.223.131.23 DST=192.168.0.3 LEN=1500 TOS=0x00 PREC=0x00 TTL=61 ID=19581 DF PROTO=TCP SPT=443 DPT=44945 WINDOW=536 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=1470 TOS=0x00 PREC=0x00 TTL=53 ID=54993 PROTO=TCP SPT=80 DPT=42959 WINDOW=670 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=54.230.224.215 DST=192.168.0.3 LEN=1500 TOS=0x00 PREC=0x00 TTL=53 ID=37063 DF PROTO=TCP SPT=80 DPT=56790 WINDOW=122 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=54.230.224.215 DST=192.168.0.3 LEN=1500 TOS=0x00 PREC=0x00 TTL=53 ID=62828 DF PROTO=TCP SPT=80 DPT=56787 WINDOW=122 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=54.230.224.215 DST=192.168.0.3 LEN=1500 TOS=0x00 PREC=0x00 TTL=53 ID=42641 DF PROTO=TCP SPT=80 DPT=56791 WINDOW=122 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=186.223.131.23 DST=192.168.0.3 LEN=1500 TOS=0x00 PREC=0x00 TTL=61 ID=19582 DF PROTO=TCP SPT=443 DPT=44945 WINDOW=536 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=186.223.131.23 DST=192.168.0.3 LEN=1500 TOS=0x00 PREC=0x00 TTL=61 ID=19583 DF PROTO=TCP SPT=443 DPT=44945 WINDOW=536 RES=0x00 ACK URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=186.223.131.59 DST=192.168.0.3 LEN=85 TOS=0x00 PREC=0x00 TTL=61 ID=55836 DF PROTO=TCP SPT=443 DPT=33798 WINDOW=718 RES=0x00 ACK PSH URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=53 ID=42117 PROTO=TCP SPT=80 DPT=42963 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=53 ID=42118 PROTO=TCP SPT=80 DPT=42962 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=53 ID=29286 PROTO=TCP SPT=80 DPT=42957 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=208.94.2.7 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=53 ID=33839 DF PROTO=TCP SPT=80 DPT=59163 WINDOW=12 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=53 ID=29287 PROTO=TCP SPT=80 DPT=42954 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=53 ID=42119 PROTO=TCP SPT=80 DPT=42963 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=53 ID=42120 PROTO=TCP SPT=80 DPT=42962 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=173.194.37.141 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=53 ID=8090 PROTO=TCP SPT=80 DPT=42961 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=74.125.21.95 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=40 ID=38562 PROTO=TCP SPT=80 DPT=37232 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=74.125.21.95 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=40 ID=4802 PROTO=TCP SPT=80 DPT=37233 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=74.125.21.95 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=40 ID=38563 PROTO=TCP SPT=80 DPT=37232 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=74.125.21.95 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=40 ID=4804 PROTO=TCP SPT=80 DPT=37233 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=74.125.21.95 DST=192.168.0.3 LEN=52 TOS=0x00 PREC=0x00 TTL=40 ID=4807 PROTO=TCP SPT=80 DPT=37233 WINDOW=670 RES=0x00 ACK FIN URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=186.223.131.42 DST=192.168.0.3 LEN=85 TOS=0x00 PREC=0x00 TTL=61 ID=11869 DF PROTO=TCP SPT=443 DPT=36041 WINDOW=490 RES=0x00 ACK PSH URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=186.223.131.42 DST=192.168.0.3 LEN=85 TOS=0x00 PREC=0x00 TTL=61 ID=11871 DF PROTO=TCP SPT=443 DPT=36041 WINDOW=490 RES=0x00 ACK PSH URGP=0
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[drm] stuck on render ring
[drm] GPU crash dump saved to /sys/class/drm/card0/error
[drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[UFW BLOCK] IN=wlan0 OUT= MAC=00:1b:b1:50:b6:12:00:1d:d6:63:57:71:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2